Bugs Detector Raksa Prof-120
- WORLDWIDE Shipping – $19.95
- WE ACCEPT Credit Cards
- Reviews (0)
- Shipping & Payment
- Return Policy and Warranty
RAKSA-120 is designed to detect near-field positioning and transmitting devices that are used for the removal of secret audio – video. Using the indicator does not require special professional skils.
Detector bugs RAKSA-120 can detect:
• cell phones of standards
GSM 850 / 900E / 1800/1900,
CDMA 450 (A-H) / 800/1900
• Wireless DECT telephones
• Bluetooth devices and Wi-Fi
• wireless video camera
• radio transmitters with analog modulation (AM, FM, PM)
• radio transmitters with digital modulation and continuous carrier (FSK, PSK, etc.)
• radio transmitters with wideband modulation with a bandwidth up to 10 MHz
By the principle of action of selective field indicator RAKSA-120 is a high-speed superheterodyne receiver with low IF and frequency synthesizer. Cycle time scanning and analysis of all digital and analog signals less than 1.5 seconds. Indicator field RAKSA-120 can operate in the protection mode, browse, search, search by subtracting the spectrum monitoring and digital signals.
Features indicator field RAKSA-120:
• selective radio reception
• High-speed scanning and analysis
• Detection of broadband and digital signals
• Adaptation to the background in the armed mode
• the ability to search with the subtraction of the spectrum
• audio control signals
• measurement frequency and signal level
• Alarm event log
• Silent alarm indication (vibrate)
• lack of an external antenna
protection mode is designed for continuous monitoring of the detected analog and digital radio signals automatically (without operator) and alarm in the event of dangerous radio signal, ie, RF signal with a level exceeding the threshold. Arming is used in cases where the original source of the radio signal is not dangerous or is not active. Information about events is stored in the alarm log.
In the protection mode for the analog signals are subtraction of the background spectrum. This reduces the effect of stationary (constantly present) interfering signals and noise. Algorithm adaptation background spectrum tracks slow changes in levels of these interfering signals.
Browse mode is designed to detect the analog and digital radio signals of all types. In this mode, the display shows a list of all currently detected signals, sorted by frequency or signal type.
Search mode is intended for the detection and location of both analog and digital radios. The display shows the signal having the maximum level. This mode is used in cases when there is the possibility of moving the indicator field to search for a radio transmitter.
In search mode, the analog signal is implemented light and sound indication of the relative signal strength – at a repetition rate of LED flashes can be judged move closer or farther from the transmitter.
Search mode subtraction spectrum
Search mode subtraction spectrum is designed to detect and locate the analog transmitters. Using this mode has advantages over conventional search mode if the transmitter is located in the same room.
In search mode, with the subtraction of the spectrum is determined not by the absolute level of the analog signals, and the relative – his difference with the basic range, which has been measured at the beginning of the work in this mode. It is known that when approaching or away from the transmitter, which is located indoors, the signal level varies strongly, compared with a transmitter located outside. Because in the search mode indicator field spectrum subtraction selectively responsive to level changes, the local transceivers are detected with greater certainty.
In search mode, with the subtraction of the spectrum is implemented light and sound indication of the relative signal strength.
Monitoring digital signals
Digital signal monitoring mode is designed to detect signals GSM900 / 1800, UMTS (3G), CDMA450, DECT cordless phones cellular standard phones, Bluetooth devices, Wi-Fi and other pulse signals in the 2.4 GHz band. It displays a list of all the digital signals and the detected levels in the monitoring mode, the digital signal on the display.
Audio Monitoring analogue signals is possible in the viewing modes, search, and search by subtracting the spectrum. When listening to audio surveillance carried amplitude-modulated signals through the built-in speaker. Using audio surveillance in some cases facilitates identification signals and allows the use of “acoustic”.
Alarm Event Log
The alarm event log stores information about dangerous radio signals that have been detected in the armed mode. The maximum number of entries – 200. If both are found dangerous signals of different types, the journal stores information about each of them. When viewing the recording, the display shows the time of appearance and disappearance of the signal, its type and the maximum level.
Receiving frequency range: 40-3800 MHz
Typical sensitivity: 70 mV / m
Dynamic range: 50 dB
Bandwidth: 10 MHz
Full scan cycle time: 1.5 seconds
While working in guard mode: 4-12 hours.
While the other modes in 3 hours.
Display: OLED, 128 x 64
Dimensions: 77 x 43 x 18 mm
Weight: 35 g
We ship Worldwide as a gift! You don't pay duty!
All shipping options utilize a mix of reliable carriers to ensure your order is delivered in a secure manner within the promised timeframe. After the order is placed, the system automatically selects the most efficient shipping method based on destination, size and weight.
Check local rules and regulations about all customs/brokerage fees, duties, taxes and restrictions imposed on goods imported into the country of destination. Please note all fees mentioned above are the responsibility of the recepient. All costs incurred on a refused delivery because of high customs, brokerage fees, duties or taxes imposed by the country of destination are the responsibility of the customer.
How long does it take to process an order?
Most in-stock orders are shipped within 1-3 days from an Russia-based distribution center. Orders that require shipment from our vendors or are for custom-built products may take slightly longer to fulfill.
For faster delivery please choose any of the express shipping options when ordering. If an item is not available immediately, you will be notified with an estimated time of arrival. Once contacted, you may allow the order to continue or make any adjustments, including cancellation, if desired. If an order cannot be shipped in its entirety, we reserve the right to hold the order until all items are in stock or to send items as they become available.
How can I track my order?
Tracking information is sent via email upon shipment. To check order status, see http://globaltracktrace.ptc.post/gtt.web/
- Credit card payments (VISA, MasterCard/EuroCard, American Express, Discover) via Paypal,
even if you don't have Paypal account The Shopping Cart System let you make an order in a simple and quick way.
The only you are to do is to click "Add to cart" link near the chosen item (at the very page of this item or in catalogue). Then you will be directed to the shopping cart for review. You can continue shopping at this point or simply choose the quantities you would like, calculate the total sum with shipping cost and finalize your order. You will be prompted for your credit card information and given the opportunity to adjust your billing and shipping information. At this point, you will be ready to place your order.
- PayPal payments.
Our goal is to ensure your complete satisfaction with your purchase. If, for whatever reason, you are dissatisfied with your purchase, you can return it to us within 30 days of purchase date. Claims for missing items or items damaged in transit must be received within two business days of receipt of merchandise.
You have the option of exchanging the item(s) or receiving a refund for the full amount of the item purchased . Refunds on returned items will be issued in the same payment form as tendered at the time of purchase. If payment was made by credit card, once we receive the product we will credit your account. Please allow 7-10 days for a credit to appear on your credit card statement.
Please read all conditions below. If conditions are not met, Rugift reserves the right to refuse the return or to charge a restocking fee of 15%.
How to return or exchange an item:
In order to return an item you need to contact us via email. We’ll give you the detailed instructions for return.
All returned or exchanged items must be in new condition, in their original box, and must include all packing material, blank warranty cards, manuals and all accessories.
Defective items may be repaired or exchanged at our discretion for the same model or manufacturer's equivalent model.
We are not responsible for any consequential or incidental damage resulting from the sale or use of any merchandise bought from us. We are responsible for the monetary value of the merchandise only.
Special Order merchandise
All watches are guaranteed for 12 months from the date of original purchase. Any defect that arises due to faulty materials, workmanship or shipping damage will be repaired by us free of charge during this period. The guarantee doesn't cover accidental damage and misuse.
The quality of the Goods is in full conformity with the technical Conditions of the manufacturer and checked by Technical Control Service (OTK).
You should keep warranty coupon (it is usually in the instruction which is shipped with the product) till the end of the guarantee period (12 months). In case you return the device back, please ask the shipping address at email@example.com
12 months warranty applies only to new watches.